Heavy Hammer Crusher/hammer crusher/ore crusher

Product Description
Brief introduction: PCF series Heavy Hammer Crusher is applied to medium-hardness stone with hardness lower than 100 Mpa, such as limestone, malm, sandstone, shale, gypsum, coal and so on.

Product Feature
Characteristics: PCF series Heavy Hammer Crusher set stone crushing and shape as a whole, with big feeding granularity and small outgoing granularity. Changing three-level crushing to first-level crushing, rotor speed is high, the hammer with great weight and durable service. It has advantages of large reduction ratio, great production, particles shapeliness, simple structure, easy maintenance, etc. Adopt new design idea. Comparing with the same type produces, it has larger production and higher qualified rate, shapeliness particles, lower energy consumption. Enable to crush wet or dry tow forms material, can handle higher water content materials, not blocking materials. The replacement of wearing parts is very convenient, and the maintenance cost is low; This equipment can replace the primary, secondary crushing of traditional jaw crusher and impact crusher, thus reduce the equipment investment.

Product Specification/Models
Specification PCF 0806 PCF 0808 PCF 1008 PCF 1010 PCF 1210 PCF 1510 PCF 1512 PCF 1615 PCF 2015

Other Information
Operating principles: Rotor disk, driven under the motor, drive the hammerhead to do high-speed circular motion. Materials are carried into machine from the upper feeding inlet, crushing by the strike, impact, bump, and grind of the high-speed running hammerhead. After crushing, those materials with larger granularity than requirement hit the counterattack board for re-crush along the hammer tangent direction with the new materials, so that the coarse, medium and fine crushing all in one station, finally materials meeting requirement exclude from material outlet.